设为首页 | 加入收藏
网站首页            关于我们             促销产品             产品展示             技术支持             新闻动态             人才招聘            客户留言             联系我们
100%的品质,绝对的放心!欢迎新老客户前来选购!
www.vnsr168.com

产品分类
UPS不间断电源
     APCUPS电源 
     山特UPS电源 
     梅兰日兰UPS电源 
     伊顿UPS电源 
vns威尼斯vns9080
威澳门尼斯人5959ccUPS电源维修保养
UPS电源维修
UPS蓄电池
机房精密空调
     艾默生机房空调 
电池箱
防雷器
     菲尼克斯防雷器 
机房工程
 
联系我们
 

Shenzhen Mayland Industrial Co., Ltd.
Tel
:0755-26401777
Fax:0755-26401777
Website:
www.mayland.com.cn
E-mail:mld@mayland.com.cn
Add.:Room17D,Block A,Tianyuan Building,
No.1153 Nanshan Avenue,Nanshan District,
Shenzhen,518052,China.     

 
 
产品展示 您现在的位置是产品展示 UPS不间断电源伊顿UPS电源
名称:伊顿 9PX系列5~11KVA
vns威尼斯vns9080
伊顿UPS 9PX系列(5~11KVA)是伊顿集团全新推出的新一代高智能、高可靠性和广泛适用性的高频在线式UPS电源。将取代当前市场上的9135系列,MX系列与EX RT 1:1产品(EX RT 3:1产品继续销售)。在这些受市场好评产品的基础上,结合了伊顿公司在UPS技术上领导性的创新,所推出的9PX具有鲜明的特点和稳定的可靠性,能够为IT高密度机柜应用,工业和制造环境以及医疗设备应用提供安全、可靠与高效的电力保护。
 vns威尼斯vns9080
性能特点:
vns威尼斯vns9080UPS
• 市电模式可达95%效率,同类产品业界第一
• 节能模式可达98%的输出效率
• 0.9输出功因,比竞争对手产品能够多带28%的负载
最适合操作的大屏幕三维LCD
• LCD屏既可以沿自身平面圆心180度旋转以适应R/T互换,又可以沿水平中心轴调整LCD观察角度,以适应工作人员查看和操作
• 可通过LCD实时读取负载用电量状况
• 可对负载进行分区操作和管理
支持双输入的小UPS
• 8K和11K机型可支持旁路和市电双电源输入
• 使用并机组件可实现1+1并机(该功能于2013年上市)
• ABM电池管理技术延长电池寿命50%以上
全面支持虚拟化vns威尼斯vns9080vns威尼斯vns9080
• 伊顿UPS是业内最先支持虚拟化IT系统的电源
• 全面支持VMware, Microsoft Hyper-V, Citrix虚拟化系统
• 支持关断虚拟服务器,支持虚拟服务器实时迁移
 vns威尼斯vns9080
技术参数: 

Eaton 9PX 5-11kVA UPS Technical Specification

 

CONSTRUCTION

 

Model

9PX5Ki

9PX6Ki

9PX8Ki

9PX11Ki

Rating

5kVA/4.5kW

6kVA/5.4kW

8kVA/7.2kW

11kVA/10kW

Power Factor

0.9

0.91

Technology

VFI-SS-111, on-line double conversion with power factor correction

Dimensions: W x D x H (mm)
Rack Configuration:

 

440 x 685 x 130 (3U)

Power Module: 440 x 700 x 130 (3U) Battery Module: 440 x 680 x 130 (3U)

Dimensions: W x D x H (mm)
Tower Configuration:

 

130 x 685 x 440

 

260 x 700 x 440 (combined)

 

Weight (kg)

 

48kg

Total: 84kg (Power Mod: 19kg) (Battery: 65kg)

Total: 86kg (Power Mod: 21kg) (Battery: 65kg)

Colour

Black, RAL 9005

ENVIRONMENTAL & SAFETY

 

Ambient storage temperature

0C to +35C with batteries and -15C to +60C without batteries

 

Ambient service temperature

Power electronics part: 0 to +40C

Battery part: +5 to +25C without reducing battery life

Maximum service altitude

1000m above sea level, 10% de-rating for every 1000m to 3000m maximum

Relative humidity

0 to 95%, no condensation allowed

Degree of protection

IP20 (EN60529)

 

Acoustic Noise @ 1m

≤45dB 5/6kVA, ≤48dB 8kVA, ≤50dB 11kVA Online mode at nominal conditions, battery fully charged

 

Safety Conformance

IEC 62040-1:2008, IEC 60950-1:2005, UL 1778 4th (5 & 6kVA UPS, 8 &

11kVA Power modules)

 

Electromagnetic Compatibility

IEC 62040-2:2006 Categories C2, CISPR22 Class A, FCC part 15 Class A (5 & 6kVA UPS, 8 & 11kVA Power modules)

Agency Markings

CE, CTick, UL (5 & 6kVA UPS, 8 & 11kVA Power modules

POWER CONNECTIONS

 

Input

5/6kVA: Terminals (up to 10mm2), 8/11kVA: Terminals (up to 16mm2)

Output

5/6kVA (without MBP): Terminals (up to 10mm2), +(2) IEC16A, +(4) IEC10A

programmable Group 1, +(4) IEC10A programmable Group 2

5/6kVA (with MBP): Terminals (up to 10mm2), +(2) IEC16A, +(3) IEC10A

8/11kVA (without MBP): Terminals (up to 16mm2)

8/11kVA (with MBP): Terminals (up to 16mm2) +(4) IEC16A

USER INTERFACE

 

Display

Graphical Blue LCD with LED backlight, 4x LEDs for notice and alarm

Standard Communication Ports

(1)USB 2.0, (1)RS232;DB9, (1)Relay Port;DB9, (1)Remote Power Off Port, (1)Remote On/Off Port, (1)Minislot Port (Empty), (1)Parallel Port;DB15

Relay Port Voltage Free Contacts

On Mains, On Automatic Bypass, On Battery, Battery Low, Load Protected

Output Relay Specifications

250V AC, 5A

Optional

Minislot cards; Web/SNMP, Relay, ModBus

ELECTRICAL CHARACTERISTICS - INPUT

 

Number of input phases

1 Phase (Separate Rectifier and Bypass inputs available on 8-11kVA)

 

 

 

 

Rated input voltage and voltage tolerance

Rectifier:  230Vac nominal (200, 208, 220, 240, 250V* Selectable**)

Tolerance: 176-276V (-23% to +20%) at 100% load,

150-276V (-35% to +20%) at 80% load,

125-276V (-45% to +20%) at 60% load,

100-276V (-56% to +20%) at 40% load

Bypass:  187-264V*** at nominal 230V (-20%, +15% of nominal)

*250V available only on 8/11kVA

**De-rate for 11kVA. 200/208/250V: -10% kVA/kW, 220V: -1% kW

***Can be set to 160-264V, or up to 100-264V if unsynchronised bypass transfer function is enabled


ELECTRICAL CHARACTERISTICS – INPUT (continued)

 

Model

9PX5Ki

9PX6Ki

9PX8Ki

9PX11Ki

 

Operating Frequency / Tolerance

50/60Hz Auto-sensing

Tolerance 50Hz nominal: 40-60Hz before transfer to battery

Tolerance 60Hz nominal : 50-70Hz before transfer to battery

Input current distortion

<> THDi (nominal input voltage, full load and battery fully charged)

Input power factor

≥0.99pf

Inrush Current

≤800% of rated RMS current

UPS Nominal Input Current @

230V with batteries fully charged

 

21A

 

25.2A

 

33.1A

 

45.8A

Recommended protection circuit rating (D Curve)

 

32A

 

50A

 

80A

ELECTRICAL OUTPUT CHARACTERISTICS – NORMAL MODE

 

Rated apparent/active power

5kVA/4.5kW

6kVA/5.4kW

8kVA/7.2kW

11kVA/10kW

Number of output phases

1 Phase

Load power factor range

0.5 lagging to 0.5 leading

 

Rated output voltage

230Vac nominal (200, 208, 220, 240, 250V* Selectable**)

*250V available only on 8/11kVA

**De-rate for 11kVA: 200/208/250V -10% kVA/kW,  220V -1% kW

Steady state voltage variation

±1%

 

Dynamic voltage regulation &

recovery time

±6% for 20%→100%→20% Resistive Load

±9% for 0%→100%→0% Resistive Load

Recovery time 100ms to 90% Vnom after 0%→100%→0% non-linear load

(IEC62040-3 reference) step

Crest factor

3:1

Rated output frequency

50Hz (default) or 60Hz

 

Output frequency regulation

When synchronised: ±5% default, selectable ±1% to ±10% Unsynchronised (or on battery mode or frequency converter mode) ±0.5%

Frequency Slew Rate

1Hz/s (0.5 Hz/s in Hot Standby configuration)

Total output voltage distortion

<2%>ar load; <5%>n-linear load (IEC62040-3 reference)

 

 

 

Overload capability

100-102%: No alarm

102-110%: Load transfers to bypass after 2 minutes

110-125%: Load transfers to bypass after 1 minute

125-150%: Load transfers to bypass after 10 seconds

>150%: Load transfers to bypass after 500ms

Maximum current: 90A for 5/6kVA models, 120A for 8kVA, 150A for 11kVA

 

Overload capability (bypass mode)

100-125%: No alarm

125-150%: UPS shuts down after 1 minute

>150%: UPS shuts down after 1 second

ELECTRICAL OUTPUT CHARACTERISTICS – STORED ENERGY

 

Rated apparent/active power

5kVA/4.5kW

6kVA/5.4kW

8kVA/7.2kW

11kVA/10kW

Waveform

Sine Wave

Transfer–normal to stored energy

No break

Load power factor range

0.5 lagging to 0.5 leading

 

Rated output voltage

230Vac nominal (200, 208, 220, 240, 250V* Selectable**)

*250V available only on 8/11kVA

**De-rate for 11kVA: 200/208/250V -10%,  220V -1% kW

Steady state voltage variation

±1%

 

Dynamic voltage regulation &

recovery time

±6% for 20%→100%→20% Resistive Load

±9% for 0%→100%→0% Resistive Load

Recovery time 100ms to 90% Vnom after 0%→100%→0% non-linear load

(IEC62040-3 reference) step


ELECTRICAL OUTPUT CHARACTERISTICS STORED ENERGY (continued)

Model

9PX5Ki

9PX6Ki

9PX8Ki

9PX11Ki

Crest factor

3:1

Rated output frequency

50Hz (default) or 60Hz

Output frequency regulation

±0.5%

Total output voltage distortion

<2%>ar load; <5%>n-linear load (IEC62040-3 reference)

Efficiency

>91%

Overload capability

102-130% 10s, >130% 100ms

EFFICIENCY (Input/Output)

 

Efficiency at 100% load (On Line

Mode/High Efficiency Mode)

 

>93.5% / 98%

 

>94.5% / >98%

 

>95% / 98%

 

 

Battery Management

Advanced Battery Management (ABM®) = 90% resting, 10%

floating/charging. Automatic battery testing, deep discharge protection, automatic recognition of battery modules, float temperature compensation -

3mV per oC (25oC nominal)

Battery Nominal Voltage

5/6kVA:180V (90 Cells),8/11kVA: 240V (120 cells)

 

Charging Current

5/6kVA: 1A ±20%, 8/11kVA: 1.7A ±20% (Additional 12A for 8/11kVA

available with Supercharger option)

UPS Standard Battery

Configuration

5/6kVA: 15 x 12V 5 Ah internal batteries, VRLA, AGM

8/11kVA battery module (EBM): 20 x 12V 9 Ah batteries, VRLA, AGM

 

EBM Configuration

5/6kVA: 2 strings of 15 x 12V 5 Ah batteries

8/11kVA: 1 string of 20 x 12V 9 Ah batteries

Battery Replacement

Hot-swappable internal and external batteries

Battery Run Times 9PX5Ki*

Internal

+ 1 EBM

+ 2 EBMs

+ 3 EBMs

+ 4 EBMs

Minutes @ 100% load, 0.9pf

3.5

20

38

54

80

Recharge time to 90% capacity

1.5h

7.1h

13.7h

19.4h

27.4h

Battery Run Times 9PX6Ki*

Internal

+ 1 EBM

+ 2 EBMs

+ 3 EBMs

+ 4 EBMs

Minutes @ 100% load, 0.9pf

3

16

28

47

58

Recharge time to 90% capacity

1.5h

7.1h

13.7h

19.4h

27.4h

Note: 4 EBMs recommended for 5/6kVA, maximum 12 EBMs possible

 

Battery Run Times 9PX8Ki*

Std EBM

+1 EBM

+2 EBMs

+3 EBMs

+4 EBMs

+5 EBMs

Minutes @ 100% load, 0.9pf

5

16

27

36

50

65

Recharge time to 90% capacity

1.52h

4.6h

7.7h

9.8h

13.6h

17.9h

Battery Run Times 9PX11Ki*

Std EBM

+1 EBM

+2 EBMs

+3 EBMs

+4 EBMs

+5 EBMs

Minutes @ 100% load, 0.9pf

3

10

18

25

34

42

Recharge time to 90% capacity

1.43h

2.72h

6.8h

9.2h

12.4h

15h

Note: 6 EBMs recommended for 8/11kVA, maximum 12 EBMs (or 400Ah) possible with additional charger (Supercharger option) Contact Eaton for run times with 7-12 EBMs or large external batteries.

*Battery times are approximate and vary depending on age, temperature, load configuration and battery charge.

BYPASS CHARACTERISTICS

 

 

Type of bypass

Automatic Static Bypass

Common Mains & Bypass input for 5/6kVA Separable Mains & Bypass input for 8/11kVA

 

Transfer time

0ms (10ms or 20ms unsynchronised transfer to bypass can be selected)

<>ms transfer time when exiting from High Efficiency mode

 

Maintenance Bypass

Optional Maintenance Bypass Panel (MBP) fitted to rear, side or top of UPS, or mounted separately. Provides make before break transfer, enabling isolation, removal & replacement of UPS/Power module without disruption

PARALLELING CHARACTERISTICS

 

Maximum number of modules

2 modules in parallel for 1 + 1 redundancy or capacity

Load sharing error

<>

威澳门尼斯人5959cc
点击次数:6277

上一个   下一个
首页  |  关于我们  |  促销产品  |  产品展示  |  技术支持  |  新闻动态  |  人才招聘  |  客户留言  |  联系我们
金沙银河jsyh008